Carriers
T&M Instruments
Brand
|
Model/Services |
Exclusive Features |
Anritsu |
MS2038C |
It is the industry’s highest performance Handheld Vector Network Analyzer with frequency coverage from 5 kHz to 20 GHz PLUS a Spectrum Analyzer covering 9 kHz to 20 GHz.It is used to characterize the antennas, cables, filters, multiplexers, amplifiers, isolators, circulators, switches, and other sophisticated elements |
MS46122B |
The ShockLine™ MS46122B series consists of three PC-controlled, compact vector network analyzers (VNAs) with frequency ranges from 1 MHz to 8/20/43.5 GHz. ShockLine MS46122B series are low-cost, full-reversing, 2-port VNAs aimed at RF and microwave applications within manufacturing, engineering, and education organizations.ShockLine MS46122B VNA series ideal for passive device test applications where portability and space efficiency are key |
|
MS2090A |
A real time spectrum analyzer delivers performance never previously available in a compact, handheld instrument. With continuous frequency coverage from 9 kHz to 54 GHz, the Field Master Pro MS2090A is specifically designed to meet the test challenges of a full range of other wireless technologies in use today, including: 5G, wireless backhaul, aerospace/defense, satellite systems, and radar |
|
MS2720T |
Frequency Ranges: 9 kHz to 9 GHz, 13 GHz, 20 GHz, 32 GHz and 43 GHz, measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Mask, Spurious Emissions, Field Strength, 3G and 4G Measurement options for LTE (FDD & TDD), CDMA, W-CDMA, WiMAX, GSM, and TD-SCDMA, interference analyzer: spectrogram, signal strength, RSSI, mapping |
|
MG3694C |
RF/Microwave Signal Generator, Broad frequency coverage, phase noise, pulse modulation, fast switching speed, full analog modulation, high output power, highly configurable, highly reliable; covers audio, HF, VHF, UHF, RF and microwave frequencies from 0.1 Hz to 40 GHz in single coaxial output and up to 500 GHz or beyond, with external multipliers; in addition, easy to operate either through intuitive front panel controls or remotely via GPIB or Ethernet connectivity |
|
MT9085x |
The ACCESS Master MT9085 series is a compact handheld all-in-one tester for performing optical pulse tests, optical loss/power measurements, and optical fiber end-face inspections. It has a wide variety of applications, ranging from installation and maintenance (I&M) of trunk fibers (Core, Metro, Mobile Fronthaul, Mobile Backhaul) to troubleshooting Access networks, such as breaks in drop cables. |
|
MT1000A |
Network Master : The MT1000A transport module provides robust Ethernet/IP client service verification using industry recognized benchmark test applications driven by IEEE, MEF & ITU-T standards bodies in an intuitive, easy to use graphic interface. It supports both electrical and optical Ethernet/IP industry standard interfaces from 10Mbps to 100Gbps in a scalable platform configured to your network requirements. |
|
MT1100A |
Network Master Flex : The MT1100A can send and receive a variety of 100G x 4 client signals, offering strong support for R&D of 400 Gbps networks and transport equipment. |
|
MP2100B |
MP2100B incorporates a BERT supporting up to 4 channels as well as a sampling oscilloscope in a single, compact, 18 cm deep cabinet, slashing equipment investment costs and saving bench-top space. In addition, the BERTWave MP2100B reduces measurement times by eliminating the need to change cable connections at simultaneous BER measurements, Eye Mask tests, and Eye pattern analyses. Additionally, adding the SFP+ plug-in port supports optical BER measurements |
|
MP1900A |
The Signal Quality Analyzer-R MP1900A series is a high-performance BERT with excellent expandability for supporting Physical layer evaluations.One unit can be used to evaluate both next-generation network and bus interfaces. The Signal Quality Analyzer-R MP1900A series is a modular 8-slot high-performance BERT. Installing multiple 64G PAM4 PPG modules in the slots not only supports today’ s 400 GbE analysis requirements, but also provides futureproof support for next-generation 800G measurements |
|
Anritsu-Wireless Business Group |
MT8000A |
All-in-One base station simulator that Supports for RF Measurements and Protocol Tests in Sub-6 GHz and Millimeter Wave Bands; Supports mm-wave band RF measurements and beam forming tests combined use with the RF chamber.The IMS server is inbuilt.Supports Existing LTE Test Environment |
MD8430A |
A Base station simulator for Full development and analysis toolset of L1, L2 and L3 scenario development.Supports all the way from Release 99 to Release 14. Also acts as a 5G anchor for 5G NSA opt 3 standards |
|
MD8475B |
The Signalling Tester MD8475B is an all-in-one base station simulator supporting LTE, LTE-Advanced, W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/GPRS/EGPRS and TD-SCDMA/TD-HSPA. It supports VoLTE and call-processing tests for multimode LTE smartphones and mobiles with excellent cost-performance |
|
|
MT8821C |
This is a base station simulator for RF characeristics alone. Supports all cellular technologies right from Release 99 to release 14. Also acts as a 5G Anchor for 5G NSA opt 3 standard. With in-built IMS server supports VoLTE voice/video echoback tests. Its simplistic GUI makes analysis of RF characteristics simpler |
ME7834NR |
All-in-One 5G NR Support for Protocol Conformance Tests and Carrier Acceptance Test. Supports 3GPP defined bands from Sub-6GHz to mm-Wave. Supports exisitng 4G features as well |
|
Anritsu Service Assurance |
MasterClaw Monitoring |
True end-to-end troubleshooting – Coverage of converged, next generation (NGN), legacy and hybrid networks across signalling, user plane and voice quality; Network vendor independent – Non-intrusive probes that enable monitoring of converged multi-vendor networks, without any dependency on any network equipment vendor; High scalability – Scalable from single node to fully fledged network wide hybrid data networks, fixed and mobile; Customized data view through an intuitive, user-friendly, and web based portal; Long term storage for network data events |
eoMind Streaming Analytics |
The Automation of Insight; Lightweight streaming analytics platform that is data agnostic; Incorporates advanced algorithms that identify patterns and individuals impacted; Social-media type GUI without charts but shows problems when there is one |
|
eoSight Big Data Analytics |
Visual analysis in one click; Dynamic metadata and multiple views of the data combined into a single dashboard; Highly intuitive, visual-based data discovery, dashboards and data visualization capabilities enable users to understand and share business data without extensive skills or training on a BI platform; Multi-dimensional drag and drop exploration environment that exposes the value in all the data stored—not just a limited set of fields; Interface with other sources |
|
eoLive Real-Time Analytics |
Integrated dashboards and root cause analysis – Easy drilling and flexible KPI configuration that allow jumps from charts into detailed data records, and from raw data records into message details, speeding and simplifying getting to the cause; Pro-active early detection of network performance issues that cause customer experience problems; Congestion detection and network bottleneck identification, due to the ability of collecting and correlating KPIs from various network domains; Network KPI on Access, Core and VoIP technologies handling a huge amount of data; Configurable KPI editor to fit individual needs in terms of network monitoring |
|
Aplab |
500 / 1000 / 1500MHz Synthesized Signal Generator – 2100 Series |
Combine with DDS and PLL Techniques; 1500 MHz maximum frequency; 1 ppm high accuracy, less distortion |
Deviser Instruments |
AE3100 Series Handheld SM/MM/CWDM/PON Optimized OTDR |
Featuring intuitive touchscreen controls, real-time data analysis, the AE3100 series OTDR is the ideal test instrument for constructing, deploying, maintaining, and authenticating FTTx networks – as well as verifying access networks; Multiple models and configuration options ensure your unique measurement needs are covered dual or multiple wavelengths and a choice of dynamic ranges from 28 to 45 dB |
AE2100 FTTx Multi-Function Mete |
An ultra-portable, multi-function validation solution for FTTx, RFoG and RF PON installations. Engineered to address the requirements of CSPs, the AE2100 is flexible meter that integrates cable TV analysis, metallic TDR testing and optical testing, including a fiberscope, optical time domain reflectrometer (OTDR), optical power meter, visual fault locator and light source |
|
AE919 Series Multi Optical Tester |
AE919 Series Multi Optical Tester brings the best in optical fiber network evaluation, offering exceptional test speci cations at high cost-performance, the AE919 Series is ideal for fiber installation, deployment, and maintenance in FTTH+IP and FTTH+RF projects |
|
AE8500 Optical Spectrum Analyzer |
AE8500 is a high- precision diffraction-grating OSA with a wavelength range of 1250 ~ 1650nm and power sensitivity down to 70dBm. Users can test optical signals with excellent accuracy, and the 12.1” LCD touchscreen and concise UI design make the AE8500 easy to master. |
|
TC722 All-in-One 10G Transpot Tester |
All-in-one Transport Layer Tester to support full protocol testing at rates up to 10Gbps. It provides expert analysis for next-generation high-speed Metro and Carrier Transport networks, validating performance and connectivity while cutting OPEX and CAPEX. TC722 is an efficient testing tool for service providers to satisfy client service level agreements (SLAs) |
|
E8900A 5G NR Spectrum Analyzer |
E8900A is the highest levels of performance available in a handheld RF spectrum analyzer, sweep range covers from 9kHz to 9GHz, analysis bandwidth: 100MHz, with high speed spectrum canning of 30GHz/s (@7.8kHz RBW). |
|
Electro Rent (Formerly Livingston) |
Test Equipment for Telecommunications Applications |
Offers a vast selection of Electronic T&M instruments from leading manufacturers suitable for various applications including telecom, RF & Semicon, and general electronics Keysight. Brands include Tektronix, JDSU, EXFO, Fujikura, PCTEL, Kaelus, Narda and R&S |
|
Test Center of Excellence |
Technology lab designed for ESDM and tech start-ups based on pay-as-go model, offering instruments, HW, SW, and accessories and independant application advisors |
Radiation Meter |
Meter used to measure electromagnetic filed generated by mobile towers. Narda SRM 3006 |
|
Passive Intermodulation Analyzer |
Widely used analyzer used for intermodulation effect in cables, antenna lines, and connectors in telecom domain. Kaelus, Anritsu Models |
|
SDH/SONET/Ethernet/OTN/Fiber Channel |
Help customers efficiently solve their test & measurement challenges. 1G/10G/Fiber Channel/100G/STM-1/4/16/64 |
|
Digital Oscilloscope |
HDMI, USB, Ethernet, MIPI, MIDI-PHY, PCIe, and general purpose applications |
|
xDSL, T1, E1 Test Equipment |
– |
|
BERT, Arb/Pattern Generators |
Keysight, Tektronix |
|
RF Spectrum Analyzers |
Keysight, Tektronix, R&S, Anritsu |
|
Phase Noise Measurement Solutions |
One of the most important figures of merit of a signal generating device and can well be a limiting factor in a mission-critical application in aerospace and defense, as well as in communications |
|
Noise Figure Measurement Solutions |
Active component testing |
|
Test Equipment for Semiconductor & Components Applications |
Oscilloscopes; Logic analysers; semiconductor parametric analysers; RF network analyzers; RF signal generators |
|
Test Equipment for Contract Manufacturing Applications |
DC power supplies; RF network analyzers; AC sources; RF signal generators; modular products, CMW500, CMW200 |
|
EXFO India |
MaxTester 700B |
The first tablet-inspired OTDR line that is handy, lightweight, and rugged enough for any outside plant environment |
FG-750 |
Scalable test solution for fiber network monitoring and management, from one stand-alone unit Continuous 24/7 fiber network monitoring. Automation of OTDR testing for network operation and maintenance |
|
Max-800 |
Portable 10G test solution. Optimize your field technicians’ tasks by running up to two 10G tests simultaneously. Lightweight and portable solution designed for field engineers or cell technicians installing, troubleshooting, and maintaining backhaul, OTN, SONET/SDH, and DSn/PDH Carrier Ethernet networks |
|
FIPT-400-MF |
An automated multifiber inspection solution designed to easily access and inspect recessed multifiber connectors, including MPO and MTP®, in dense panels |
|
NetBlazer V2 Series |
Comprehensive testing for DSn/PDH, ISDN, SONET/SDH, OTN, Fibre Channel (1x-16x), CPRI, and Ethernet interfaces up to 100 Gbit/s |
|
FTB-88100NGE/88100G |
10M-to-100G compact multiservice field-test solution addressing testing, troubleshooting, and performance-assessment requirements of next-generation networks. Unprecedented testing simplicity requiring minimal training for new users and maintaining a consistent experience from the lab to the field |
|
Fastech Telecommunications |
IBflex and MXflex RF Scanners |
Test and optimise LTE FDD/TD-LTE, MIMO, NB-IOT, and wi-fi networks with multi band support with multiple simultaneous measurements. Inbuilt battery operation helps in-building and outdoor tests |
PVA-3000 |
Comphrensive 10/100/1000 Base-T interface measurements and testing for LAN PHY Transmission and Interface Metering-PSD, SNR, Echo, Crosstalk, Skew& wideband pwr measurements; LAN Phy Receiver testing with controlled impairments(Line loss, Crosstalk, Line Mismatch, Offset, Tx Jitter, Slew, Tx ower manipulations); Link Stability testing & Link |
|
PSA-3000 |
Comphrensive PoE and PSE testing for 10/100/1000 Base-T interface; IEEE 802.3at, IEEE 802.3bt, & Pre-802.3bt 4-Pair Testing; IEEE 802.3at LLDP Emulation & Analysis; Automated /Sequenced 23 PSE Tests Producing Over 70 802.3at Parameters / Port; Approved for Ethernet Alliance 1st Party (self) Certification Testing of 80 2.3at PSE’s; |
|
|
FX150+-OTDR |
Rugged, Light-weigh, compact, OTDR |
FX8x-Product family |
New Generation Rugged , Light-weight and Handheld Optical testing tools |
|
MTX150-Multi-service Installation & Maintenance Test Set |
New Generation Rugged , Light-weighed and Handheld Multi-technology test set |
|
TX320s/TX340-All-in-one Optical and Service Test Platform |
Hand-held, Modular, Multi-technology Test Set |
|
RXT1200/6200/6400 |
The RXT is the industry’s most flexible, compact, and future-proof hand-held test solution for core, metro, access and fiber optics applications. The RXT family of modules offer a full range of link and service testing capabilities, from Core to Access, from Lab to Field and from 64k to 400G, with a complete range of communication technologies, including eCPRI, CPRI/OBSAI, OTN, SDH/SONET, PDH/DSn, Carrier Ethernet, SyncE, 1588v2 PTP, Fibre Channel, OTDR, OSA |
|
MPA |
The MPA® Multi-Protocol Analyzer is an advanced packet optical transport traffic generation and analysis platform specifically designed for the demands of R&D, SVT, and manufacturing testing environments. The MPA provides simultaneous independent multi-port testing from 1G to 400G for Ethernet/IP, OTN & SDH/SONET and Fibre Channel. |
|
Remote Fiber Test System |
The Remote Fiber Test System (RFTS) comprises the RTU-4000 platform with the RTU-4100+ OTDR optical test module. The RFTS monitors optical fiber infrastructures in Core, Metro, Access and FTTx/PON networks, improving workflow and reducing Mean Time to Repair (MTTR). |
|
ADVA OSA 5401 |
OSA 5401 is a highly accurate and uniquely efficient small form-factor pluggable (SFP) GNSS receiver and grandmaster clock with the smallest footprint and most compact design on the market. With its entirely new timing distribution architecture, it meets the stringent synchronization requirements of today’s radio access networks. |
|
ADVA OSA 5420 |
OSA 5420 supports NTP, Precision Time Protocol (PTP), Synchronous Ethernet and sync supply unit capabilities. They feature a high-capacity Stratum 1 server and provide hardware timestamping, as well as PTP to NTP conversion, delivering a complete NTP solution to any IP-based network. |
|
Xena Vulcan |
Vulcan generates stateful Layer 4-7 Ethernet traffic and then analyzes how firewalls, switches, routers, NAT routers, proxies, load-balancers, bandwidth shapers and so on perform in a wide range of real-world scenarios. |
|
Xena Safire |
Safire is the only solution on the market that solves Entrprise Firewalls problem quickly and cost-effectively.Enterprise firewalls improve network security by segmenting corporate LANs. However, each of the advanced security functions (e.g. antivirus, app-control, IPS and SSL decryption) has a performance penalty. Combined, these features can easily reduce network performance by 90% – frustrating users and reducing business performance. |
|
Nexus 8630 |
Multi-user portable analyzer enabling the monitoring and troubleshooting of access networks (ISDN/PRI, SS7), mobile networks (GSM, GPRS, UMTS, HSPA+, CSMA-1/CDMA2000), IMS/NGN/WiMAX (VoIP) networks, and LTE networks (control plane and user plane correlation) protocol analyzer |
|
Cubro Copper and Optical Taps |
Failsafe copper and optical taps for matched visibility of 10/100/1000 mbps 1GE (0) /10G and 100G optical networks split ratios as per requirements. |
|
|
Cubro Packetmasters |
Network packet brokers including filtering, aggregation, and load balancing based on L3-L7 parameters including Inner IP, Inner protocols, and IMSI. Search on keywords in payload for analysis or LI. Up to 64×100 Gbps supported in a single appliance. |
Narda IDA 2 |
Handheld signal analyzer for detecting, analyzing, and localizing RF signals and interference. It supports, spectrum analysis, direction finding with map view, channel analysis, I/Q analysis, high time resolution spectrograms, persistence spectrum and time domain triggering for 100 percent POI down to the range of nanoseconds |
|
SignalShark with ADFA |
Real-Time handheld analyzer for detection, analysis, classification and localization of RF signals between 9 kHz and 8 GHz. Applicable for mobile and stationary use. Automatic Direction Finding Antenna for RF Signal Identification and Localization |
|
NRA-RX |
Rackmount Spectrum Analyser – Particularly useful for radio spectrum monitoring applications: Excellent RF characteristics, analysis in the frequency and time domains, I/Q streaming, demodulation, audio output |
|
Radman / Nardalert |
Personal EMF radiation monitor for occupational safety and health |
|
NBM-550 |
For broadband EMF radiation site surveys from DC and ELF (1 Hz) upto RADAR (90 GHz) |
|
SRM-3006 |
Selective measurement of high frequency electromagnetic fields in the frequency range from 9 kHz to 6 GHz. supports code Selective measurement EMF contribution of UMTS, LTE-FDD and LTT-TDD Cellular services. |
|
WaveJudge 5000 |
Over the air analysis of 4G/5G protoocls with realtime correlation of PHY layer; Supports 40 MHz bandwidth on each module for LTE, and up to 800 MHz for 5G |
|
Fluke Networks |
DSX CableAnalyzer Series Copper Cable Certification |
The DSX CableAnalyzer Series copper cable certifiers enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance |
OptiFiber Pro OTDR |
Fluke Networks’ OptiFiber® Pro Series OTDRs make novices and experts faster. Automated trace analysis and setup supports applications including data centers, PON and outside plant. Advanced features include Manual Expert mode, pinch and zoom for in-depth trace analysis and SmartLoop for bi-directional testing. Supports Versiv copper and fiber loss certification modules |
|
CertiFiber Pro Optical Loss Test Set |
The CertiFiber Pro Optical Loss Test Set improves the efficiency of fiber optics certification. The Taptive user interface simplifies set-up, eliminates errors and speeds troubleshooting. A set reference wizard ensures correct reference setting and eliminates negative loss errors. Built on the future-ready Versiv platform, CertiFiber Pro Optical Loss Test Set (OLTS) provides merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber Pro module. A convenient quad module supports both singlemode and multimode and is multimode Encircled Flux compliant. Copper certification and Wi-Fi Analysis and Ethernet troubleshooting modules are also available. Analyze test results and create professional test reports using LinkWare Management Software |
|
IntelliTone™ Pro 200 LAN Toner, Tracer and Probe |
The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks is the first network cable toner tracer and probe to offer digital and analog signaling all in one network toner and probe. That means it’s equipped with the most powerful cable tracing and location technologies for any work environment |
|
Pro3000™ Tone and Probe Series |
The Pro3000™ toner’s patented SmartTone™ technology (with five different tones for exact pair identification) allows the technician to identify individual pairs. The tone generator is also capable of sending tone up to 10 miles (16 kilometers) on most cables! The angled-bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks. Attach the nylon pouch to your belt, and you will be equipped for any wire identification job |
|
CableIQ Qualification Tester |
Copper qualification tester troubleshoots and qualifies Ethernet network cabling speed (10/100/1000/VoIP).CableIQ qualification tester is the first cabling bandwidth tester for network technicians. This Ethernet network cable tester gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure |
|
MicroScanner 2 Cable Verifier |
Next-generation MicroScanner verifies voice/data/video cable and services with a revolutionary user interface. Displays cable length, wiremap, cable ID, and distance to fault. Detects Ethernet, POTS, and PoE |
|
|
TS 100 Cable Fault Finder |
Bridge tap detection at the touch of a button. Detects and provides open/short circuit |
MicroMapper |
Verification tester verifies wiremap and identifies faults with LEDs. Cable tester which enables network professionals to quickly and easily verify the integrity of Ethernet twisted pair cabling |
|
MultiFiber™ Pro Optical Power Meter and Fiber Test Kits |
Fiber tester to support both Singlemode and Multimode MPO fiber certification. Automatic scanning and testing of all fibers in MPO connectors. No fan-out cords when testing MPO fiber trunks. Interprets test results on 8 or 12 fibers with minimal navigation |
|
FI-7000 FiberInspector™ Pro |
The FI-7000 FiberInspector Pro is a fiber optic inspection scope that allows you to inspect and certify fiber optic connector end-faces in 1 seconds so you can get the job done the first time. This fiber optic inspection scope provides automated PASS/FAIL certification take the guess work out of fiber inspection so anyone can be a fiber expert |
|
SimpliFiber Pro Power Meter / Light Source |
SimpliFiber® Pro Optical Power Meter and Fiber Test Kits include all the tools necessary to verify and troubleshoot optical fiber cabling systems, measure loss and power levels, and inspect and clean connector end-faces.Simple-to-use fiber-loss tester with advanced time-saving features. |
|
FI-3000 FiberInspector™ Pro MPO Inspection Camera |
The FI-3000 FiberInspector Pro offers an extensive feature set that makes testing MPO fiber trunks easy and efficient. The multiple camera design provides an instant Live View with simple touchscreen gestures to move from full trunk to individual endfaces in real time. Automated pass/fail results in seconds |
|
Fiber Optic Cleaning Kits |
Fluke Networks’ Fiber Optic Cleaning Kits contains the best fiber optic cleaning tools and products to effectively remove the toughest contaminants in any fiber network |
|
INNO Instrument India |
View 6L/View 6S/View 6C/View 3/View 1/M7/M5/M9 |
The Fusion Splicer’s 5 inch/4.3 inch high resolution color LCD touch screenwith user friendly intuitive GUI (Graphic User Interface) offers large and clear fibre images to users. By double-tapping the screen, user can zoom in & out the image upto 520X which is the world’s highest magnifcation range. Moreover, the 3 LED lights (for M7/M5: 2 LED) provide bright splice condition for users working under dark environments. |
Mini 1/Mini 2/View 600 OTDR |
OTDR’s touch screen allows for user-friendly operation. Creates a report automatically. The View 600 is equipped with an industrial grade CPU and comes with SOLA application designed to simplify OTDR test process |
|
High Precision Cleaver V-7/VF-15H |
High-precision cleaver V7/V9 is an instrument for high-precision fibre cutting. Work efficiency can be maximized with easy and simple 2 step (V9:1 step) operations. An optional model V7+/V9+ has an automatic collector for fibre shards and off cuts |
|
Invas Technologies |
Type-82C |
Ultra fast splicing (5 seconds); Ultra fast heating (9 seconds); Low maintenance cost; 5” touch optimised user interface with high resolution display; User friendly; Universal clamps; Automatic arc calibration; Light weight; High data storage; Shock resistance; Water resistance; Dust resistance; 200 images/10,000 data storage capacity |
Z2C |
TEC approved; Ultra fast splicing (6 seconds); Ultra fast heating (15 seconds); Low maintenance cost; Touch screen; User friendly; Universal clamps; Automatic arc calibration; Low weight 1.7Kg only; High data storage; Shock resistance; Water resistance; Dust resistance; 200 images / 10,000 splice data storage capacity; Provides 300 splice and heat cycle; Remote upgradation; Electrode Life with 6000 arcs; SD Card slot upto 32Gb |
|
81M12 |
TEC approved; Fast splicing (14 seconds) (12 Fiber); Fast heating (45 seconds); Low maintenance cost; Touch screen; User friendly; Universal clamps; Automatic arc calibration; Low weight; High data storage; Shock resistance; Water resistance; Dust resistance; 64 images/10,000 data storage capacity; Provides 160 splice and heat cycle; Remote upgradation; 200 splicing programs and 100 heating programs |
|
Sumi-Cloud |
SumiCloud is a powerful tool that supports your fusion splicer in the field. Using your smartphone, your splicer connects to the internet and Sumitomo’s cloud services which include data management, asset management, firmware updates and maintenance support. |
|
T-400s |
Ultra fast splicing (7 seconds); Ultra fast heating (24 seconds); FTTH Application; Low maintenance cost; User friendly; Universal clamps; Automatic arc calibration; Low weight; High data storage; Shock resistance; Water resistance; Dust resistance; 64 images/10,000 data storage capacity; Provides 200 splice and heat cycle |
|
|
201e |
Ultra fast splicing (7 seconds); Ultra fast heating (24 seconds); FTTH Application; Low maintenance cost; User friendly; Universal clamps; Automatic arc calibration; Low weight; High data storage; Shock resistance; Water resistance; Dust resistance; 64 images/10,000 data storage capacity; Provides 200 splice and heat cycle |
FC-8R |
Is a 1-step optical fiber cleaver with automatic blade rotation and a digital cleave counter. Used in fusion splicing, field termination, or any application that requires precision in a confined space. It has a simple cleaving operation that can be performed in the palm of the hand, allowing the user to take the cleaver to fiber in limited slack or cramped applications. A built-in extra large fiber scrap collector handles scrap fibers resulting from the cleaving process. With each cleave, the blade is automatically rotated to a new scoring position on the cleaver blade. |
|
OX-1 Optical Explorer |
Optical Xplorer is an innovative, fast and simple-to-use fiber optic tester that verifies links and automatically explores further when potential issues are suspected. The industry’s first optical fiber multimeter (OFM), Optical Xplorer is designed to fit the reality of today’s frontline technicians—upskilling them to do more in less time without cutting on quality. A highly-intuitive job helper, it boosts frontline technician efficiency; ensures better network quality; and minimizes delays and costs associated with escalating problems to expert technicians. |
|
FTB Series OTDR |
OTDR with platform and module with upto three functional modules; Specially designed for FTTx/PON applications; 850/1300/1310/1490/1550/1625/1650 nm (mono/double/triple wavelength); Maximum dynamic range upto 50 dB |
|
Max-700C Series OTDR |
OTDR with iOLM Technology, is fully featured, is entry-level and suitable for metro and optimized. Is handy, lightweight, powerful, tablet-inspired design 7-inch, outdoor-enhanced touchscreen. iOLM-read |
|
iOLM Software |
GO BEYOND OTDR TESTING. Innovation is front and center at EXFO, and the intelligent Optical Link Mapper (iOLM) is a prime example of a game-changing solution. The iOLM lets you take advantage of the full power of your OTDR—bringing automation to a new level and enabling even the untrained technician to become a test expert in no time. The iOLM integrates all our expertise into a simple, easy-to-use software that will take your OTDR testing capabilities further than they’ve ever been. |
|
FG-750 Fiber Monitoring System |
Fiber Monitoring system; Scalable test solution for fiber network monitoring and management, from one stand-alone unit to centrally managed systems with one or hundreds of test ports. It can continuously monitor your fiber network 24/7. |
|
SKYRAN |
Scalable solution for real-time, on-demand testing and 24/7 monitoring of the RF spectrum and OF networks. Identifies any type of RF interface and PIM issues with Optical RF quickly. Powerful, real-time, high-resolution RF spectrum analysis over CPRI |
|
PPM-350D |
An intelligent PON power meter that automatically detects and adapts test parameters to the PON technology in use at the customer premises, thanks to its groundbreaking, patented PON-aware™ capability. Supports 10G-capable PON networks. Multiple PON technologies supported on a single unit: BPON (ITU-T G983.3); GPON (ITU-T G984.2); EPON (IEEE 802.3); XG(S)-PON (ITU-T G987.2); TWDM NG-PON2 (ITU-T G989.2); RF overlay; RFoG (ANSI/SCTE 174 2010) |
|
EX-1 |
A pocket-sized test solution that evolves with the network, from validating bandwidth speed up to full line rate Gigabit Ethernet, to monitoring residential and business customers’ quality of experience |
|
Max-800 |
Ethernet and SDH Analyser, portable 10G test solution. Can run up to two 10G tests simultaneously. Lightweight and portable solution designed for field engineers or cell technicians installing, troubleshooting, and maintaining backhaul, OTN, SONET/SDH, and DSN/PDH Carrier Ethernet networks |
|
FTBx-5245 |
Optical spectrum analyser offering a wide range of measurement modes tailored to the needs for R&D and manufacturing. Has long been recognized as a key performance indicator in wavelength-division multiplexing (WDM) networks. OSNR can also predict BER within just a few minutes. However, in ROADM or 40 Gbit/s systems, this method may lead to incorrect results, because the noise level between the peaks is no longer directly correlated with the noise level at the channel wavelength. EXFO’s in-band OSNR is the answer to this challenge. |
|
Fiber inspection probe -FIP-400B |
An intelligent and automated test tool transforms fiber inspection into a faster and simplified one-step. Useful for data centers, campus and private networks, lab and research |
|
FTB-890NGE |
The NetBlazer V2 Series is a complete and portable 64K to 100G test solution. Optimizes field technicians’ tasks with simultaneous coverage of legacy and high speed network interfaces |
|
|
FTB-88100NGE/88100G |
10M-to-100G compact multiservice field-test solution addressing testing, troubleshooting, and performance-assessment requirements of next-generation networks. Testing simplicity requiring minimal training for new users and maintaining a consistent experience from the lab to the field |
FTBx-88260 |
EXFO introduces the FTBx-88260, the newest addition to the Power Blazer family of test modules. Customizable, it’s built with EXFO’s Open Transceiver System (OTS), an innovative evolutionary design concept that enables users to match the type of interfaces on the module with their specific testing needs. Future-proof, as new transceivers are developed and launched, testing them will be as simple as changing an OTS insert in the test module rather than having to purchase an entirely new test unit. Introducing a new concept for the latest Power Blazer modules |
|
FTBx-88400NGE 400G |
Compact 400G multiservice test module for lab and field applications |
|
IxNetwork |
Tests complex routing, switching, and FCoE topologies by emulating a wide range of routing protocols, along with authentication and broadband encapsulations; Powerful traffic generation tools for any type of layer 2/3 testing |
|
IxLoad |
Multi-play networks and devices through emulation of Internet protocols; all common data, voice, and video protocols are supported |
|
IxN2X |
Tests complex routing and switching topologies across the IP/MPLS core, carrier edge, and broadband access networks; Powerful traffic generation and analysis capabilities for any type of layer 2/3 testing |
|
Copper Taps |
A line of copper taps, which provides complete traffic visibility and access to any network connection |
|
Network Packet Broker |
Delivers intelligent, sophisticated ,and programmable network flow optimization providing visibility and security coverage to businesses assets and helps quickly resolve application performance bottlenecks, trouble shoot problems, improve data center automation, better utilize expensive network analysis and security tools, and help better business execution because of the improved understanding of the network and data center |
|
Breaking Point Solution |
Can simulate real-world legitimate traffic, distributed denial of service (DDoS), exploits, malware, and fuzzing, validates security infrastructure, reduces the risk of network degradation by almost 80% |
|
Diversity Benchmarker II |
Is the ideal solution for large-scale drive test campaigns in all environments, can measure multiple operators and their services in parallel (up to 48 channels), collecting voice, messaging,video, and data KPIs. In addition, an optional RF scanner can be supported to provide a full representation of the physical RF environment |
|
QualiPoc Freerider III |
Portable, smartphone-based multi-channel solution for extended walk and drive-test-based quality of experience benchmarking campaigns and optimization; Optional multi-band and multi-technology R&S TSME scanner; Ruggedized, powerful, and future-proof hardware for efficient, uninterrupted, and reliable data collection. |
|
QualiPoc Android Probe |
R&S Smartphone-based (QualiPoc Android platform), remotely controlled network measurement probe for unattended network-wide, non-stop service quality monitoring and optimization. No specific license required to operate QualiPoc Android. No specific license required to operate QualiPoc Android. Ruggedized and future-proof hardware design with extra safety features for reliable and trouble-free 24/7 operation |
|
Cable Rider ZPH cable and Antenna Analyzer |
R&S one-port analyzer that has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Frequency range from 2 MHz to 3 GHz/4 GHz, upgrade via keycode. DTF, return loss, VSWR, and one-port cable loss measurment. Ideal for field use: 9-hour battery life, 2.5 kg (5.5 lb), backlit keypad, fast boot time, non-reflective display small form factor, ruggedized housing. Fastest measurement speed and boot time in entire market |
|
ZVH Cable and Antena Analyzer |
The R&S ZVH is a rugged, handy cable and antenna analyzer, designed for use in the field. Weighing only 3 kg, the R&S®ZVH is a handy instrument. The capacity of the R&S®ZVH battery is upto 4.5 hours at field opearation. Frequency range from 100 kHz to 3.6 GHz or 8 GHz.100 dB (typ.) dynamic range for filter and antenna isolation measurements. |
|
PiMPro Tower Series-PIM Tester |
R&S PiMPro Tower Series is the first truly portable family of passive intermod (PIM) analyzers. It has real world 40 W × 2 output power capability and can run on battery power for over 3 hours; Single port measurement of return loss, PiMPoint, and distance to fault without additional hardware; GPS antenna for site location stamping on test reports; Unique DAS test capability using unit’s receiver functions; Auto calibration feature |
|
|
NQView/NQDI Classic/SmartMonitor |
R&S all data management softwares which are used to monitor real time service quality monitor, transform data into insight to support business solution and flexible interface and benchmarking solution |
TSME-Ultracompact Drive Test Scanner |
Can support all band, all technologies simultaneously. Multiband support from 350 MHz to 4.4 GHz. Up to eight technologies simultaneously in one scanner. |
|
Spectrum Rider FPH-handheld Spectrum Analyzer |
This R&S Spectrum Analyzer’s Frequency ranges from 5 kHz to 2/3/4 GHz; Upgrade via keycode.Ideal for field use: 8 hour battery life, 2.5 kg (5.5 lb); Three-year warranty as standard (battery one year). Solid RF performance for diagnostics in the lab |
|
FSH-Handheld Spectrum Analyzer |
The R&S FSH is a handheld spectrum analyzer and – depending on the model and the options installed a power meter,cable and antenna tester and a two-port vector, network analyzer. Weighing only 3 kg, the R&S®FSH is a handy instrument. Frequency range from 9 kHz to 3.6/8/13.6/20 GHz.. 20 MHz demodulation bandwidth for analyzing LTE signals.Internal tracking generator and VSWR bridge with built-in DC voltage supply |
|
iBwave Unity Entreprise |
Synchronizes project information. iBwave Drive (built-in file synchronization utility for all files between Unity and design). Automates project workflow to stay agile. Customized project reports to easily communicate status. Disaster recovery planning so operations continue. Integration with iBwave Design and iBwave Mobile. |
|
iBwave Wi-Fi Suite |
Plan, design, and ensure carrier grade wi-fi. iBwave wi-fi Suite is a powerful platform that solves all challenges with a powerful wi-fi network planning and design solution which significantly reduces deployment times, ensures carrier-grade wi-fi, and simplifies future maintenance and upgrade activities. |
|
iBwave Mobile Note |
An Android app that simplifies the site survey process. Simplify site survey toolkit by draw floor plans, create them from a picture, or create geo-located pushpins with photo, video, audio, and text notes. iBwave Mobile Note captures and send RF engineers the site survey information directly in their iBwave Designs |
|
Deviser Instruments |
RF Wireless Testers, Optical Handheld Equipment for CaTV market |
|
Ixia |
IxNetwork |
Tests complex routing, switching, and FCoE topologies by emulating a wide range of routing protocols, along with authentication and broadband encapsulations |
IxLoad |
Multi-play networks and devices through emulation of internet protocols; All common data, voice, and video protocols are supported |
|
IxN2X |
Tests complex routing and switching topologies across the IP/MPLS core, carrier edge, and broadband access networks; Powerful traffic generation and analysis capabilities for any type of layer 2/3 testing |
|
Keith Electronics |
Fujikura 80C+ |
Fujikura 80C+ is a Single Fiber Fusion Splicer with core to core alignment and Dual axis obsrvation system. It is the first automated wind protector, sheath clamp and Tube heater splicing machine in the world. Minimal manual operation, splice in 4 steps, 6 sec. splicing and 9 sec. tube heating. Multi functional carrying case with integrated work station.Bluetooth capability connection feature is available in Splicer and Cleaver both |
Fujikura 62C+ |
Fujikura 62C+ is also a Single Fiber Fusion Splicer with core to core alignment, Dual axis observation system. There is fast splicing time 6 sec. and Tube heating time 15 sec in this machine. It has multi functional carying case with integrated work station. Bluetooth capability connection feature is available in Splicer and Cleaver both |
|
Fujikura 38S |
Fujikura 38S is Smallest & lightest active V-groove splicer and designed to provide an advanced FTTH Splicer. Key features are Core loss estimatiom function, Touch Panel with easy operation, Bluetooth capability connection. Applicable from 125μm/up to 3 mm diameter fiber with a sheath clamp or interchangeable fiber holder. Quick splicing time is 6 seconds only |
|
Fujikura 28S |
Fujikura 28S is smallest & lightest active V-groove splicer and designed to provide an advanced FTTH Splicer. Key features are Touch Panel with easy operation, Simple lightweight carrying case for good mobility. Quick splicing time is 6 seconds only |
|
Fujikura 70R+ |
Fujikura 70R+ is a ribbon fiber fusion splicer (up to 12 fiber ribbon) covering varied splicing needs in those fields with a series of innovative features, such as automated wind protector / tube heaters, 11 seconds splicing and 18 seconds tube heating, ruggedized body, improved carrying case. |
|
Yokogawa AQ1000 |
AQ1000 Optical Time Domain Reflectometer having dynamic range: 32/30dB. Good things come in small packages. Empower field technicians to make fast and precise measurements. It has multi touch touchscreen, one button measurement, Two OTDR view modes: Trace view and Map view, long battery operation with quick boot up time under 10 seconds, Built in Power Checker & Light Source is a standard feature and Visible Light source is optional |
|
|
Yokogawa AQ1210E |
The AQ1210E Multi Field Tester (PON) OTDR is a triple wavelength(1310/1550, 1625 nm) compact and lightweight handheld OTDR optimized for the installation and maintenance of optical fiber cables.The high dynamic range (37/35,35 dB) feature can accurately measure the trace even after the splitter in a PON system. |
Optical Power Meter |
Optical power meter is designed for fiber network installation, test and maintenance. Our power meters are easy to operate and carry in field projects also |
|
Optical Light Source |
The optical light source is used to exactly perform loss and signal line tests on optical fiber cables and help to carefully assess transmission quality on a fiber network |
|
Visual Fault Locator |
This device is inexpensive way to quickly identify pinched fibers, a breakpoint, poor connections, bending or bad splices |
|
Test and Measuring Instruments/ Tools |
Optical Fiber Identifier, Handheld Digital/Analogue Multimeter, optical fiber strippers, Fujikura CT-50 Optical Fiber Cleaver, Tool Kits, Drop Cable Stripper, Optical Fiber Connectors, Cleaning Kits, Patch Cords etc |
|
Keysight Technologies |
E7515A UXM |
Highly integrated signaling test set created for functional and RF design validation in the 4G era and beyond. It provides the integrated capabilities to test the newest designs, delivering LTE-Advanced Pro data rates up to 1 Gbps now and handling more complex requirements later |
E6650A EXF |
Dedicated to femtocell manufacturing, and validated with the latest cellular and WLAN chipsets.Also delivers the speed, performance, and scalability needed to ramp up rapidly and lower the cost of test |
|
E5515E 8960 Series 10 |
Wireless communications test set specifically designed to meet the challenging demands of wireless device hardware, software, and application development. Leveraged from the world-class E5515C hardware platform, the E5515E has new and improved high data rate hardware, multiple signaling and RF paths and increased headroom to support today’s cutting edge 3.5G technologies, such as 42 Mbps DC-HSDPA, DB-DC-HSDPA, and HSDPA-MIMO |
|
T4010S |
Conformance test system most efficient test tool available on the market today. The test platform covers conformance testing according to 3GPP TS 36.521-1 LTE RF and 3GPP TS 36.521-3 LTE RRM for FDD and TDD, 1CC, 2CC, and 3CC, as well as LTE device acceptance test plans from major network operators. LTE Advanced features, such as Release 10, 11, and 12 carrier aggregation are also available on the T4010S |
|
T4020S |
Provides a set of powerful tools specifically designed for helping users in their conformance testing projects. These conformance tools allow users to enter the information about the Device Under Test (DUT) and its main features supported, the definition of test plans to be executed, running these test campaigns automatically without user intervention, and the analysis and reporting of the results obtained |
|
T4110S |
LTE Protocol Tester is the right tool for test laboratories and LTE device manufacturers desiring to exercise LTE 3GPP signaling conformance test cases |
|
GS-8800 Series |
Series of scalable test systems built on the 8960 (E5515 series) wireless communications test set, covering cellular device design verification, conformance, and manufacturing test needs |
|
T3111S |
NFC conformance test system for RF Analog and Digital Protocol testing of NFC, EMV, and ISO devices. The Test System is based on the Keysight T1141A NFC Test Set and it is complemented by the Keysight’s or FIME’s robots for accurate and repeatability RF testing |
|
T1111S |
Bluetooth RF conformance tester is a modular test system that performs automatically the conformance test cases for Bluetooth basic rate, EDR, enhanced power control and Bluetooth low energy requirements. BITE T1111S supports test reports templates customization, remote control of the system, customization of calibration procedures, and automatic control of climate chambers |
|
Advanced Design System Software (ADS) and SystemVue ESL Software |
System simulation tools such as SystemVue and ADS to get the design right the first time, and use them in combination with test instrumentation to move quickly to the real world. Providing ready-to-use reference signal processing intellectual property (IP) for cellular technology research, these libraries dramatically increase the productivity for system architects and baseband physical layer (PHY) designers including the latest in 5G |
|
89600 VSA and WLA Software |
Measures RF and vector modulation qualities of digitally modulated signals. Use vector signal analyzer software in R&D to troubleshoot over 75 different standards and vector modulation formats |
|
Signal Studio Software |
Embedded software is a suite of flexible, easy-to-use, signal creation software that will cut the time spent on signal simulation. And, with a demonstrated first-to-market track record, Keysight’s signal creation software offers insight and confidence in the design |
|
|
Keysight Reference Solutions |
Accelerate the development of new millimeter-wave (mmWave) channel models using the 5G channel sounding reference solution. It provides accurate broadband measurements that provide greater confidence to analyze possible new 5G channels. The testbed for 5G waveform generation and analysis enables to perform broad “what if?” analyses. Waveforms at RF, microwave, and mmWave frequencies with a variety of modulation schemes at different bandwidths can be created |
X-Series Signal Analyzers |
An evolutionary approach to signal analysis that spans instrumentation, measurements, and software. It gives the flexibility to satisfy the business and technical requirements across multiple products and programs |
|
X-Series Measurement Applications |
Achieve the manufacturing test goals for today’s multi-format devices. It quickly performs standards-based measurements for compliance with IEEE 802.11 series standards and other wireless connectivity technologies |
|
E7760A Wideband Transceiver |
2U height wideband transceiver for wideband component, subsystem, and system measurements. It can cover 2 IF input/output ports from 2 to 18 GHz and up to RF input/output ports from 55 to 68 GHz connecting the M1650A mmWave transceiver |
|
E6610A Remote Radio Head Tester |
Provides a cost-effective, off-the-shelf solution that covers many of the key RF measurements and the CPRI optical interface all in a single unit. Significantly, it provides a 2-channel RRH test solution, for less than half the cost of alternative 1-channel solutions today. |
|
Signal Generators |
Offers a wide selection of baseband, RF, and microwave signal generator (signal source) products from baseband to 67 GHz, with frequency extensions to 500 GHz with millimeter-wave source modules. Signal generator offerings range from basic to advanced functionality; each delivers benchmark performance in its class to address signal source requirements in design and manufacturing |
|
Network Analyzers |
Matches real-world test results with simulation data for the immediate feedback needed to refine a design. Our multiport VNA solution based on a PXI platform provides the performance, speed, multi-site measurement functionality, and flexibility today’s engineers need to quickly and reliably test multiport components |
|
Range of oscilloscopes |
Fast real-time oscilloscope with high measurement accuracy, the only capacitive touch screen oscilloscopes, or something a little more basic, an entire range is available |
|
66319B/D and 66321B/D |
Mobile Communications DC Source 663xx series offers several features ideal for testing wireless and battery powered devices; Excellent voltage transient response ensures maximum test-system throughput by minimizing device shutdowns due to significant voltage drops in the test wiring |
|
N6705B |
DC power analyzer provides unrivaled productivity gains for sourcing and measuring DC voltage and current into the DUT by integrating up to 4 advanced power supplies with DMM, Scope, Arb, and Data Logger features. The N6705B eliminates the need to gather multiple pieces of equipment and create complex test setups including transducers (such as current probes and shunts) to measure current into the DUT |
|
FieldFox |
Handheld spectrum analyzers designed to withstand the roughest working conditions. To accelerate maintenance and troubleshooting each operating mode has a task-driven user interface that saves time in the field |
|
HAS |
Handheld spectrum analyzer, covering frequencies from 9 kHz to 20 GHz. It has features needed for operating in tough field environments and their measurement performance gives the confidence that the job’s been done right. The Keysight HSAs help in automating routine tasks to save time and ensure consistent results |
|
National Instruments India |
Oscilloscopes, Function Generators, Motion Controllers, Image Acquisition Boards, Data Acquisition Boards, RF Signal Generators, RF Signal Analyzers, FPGA boards, and DMMs |
PXI-based instruments; Compact size and mixed measurements; Software defined custom measurements; High-throughput measurements for automated test |
Rohde & Schwarz |
SMBV100B Vector Signal Generator |
Offers RF performance along with very high output level and short setting times. At the same time, it can be equipped with an internal baseband generator up to 500 MHz which allows generation of a number of digital standards (e.g., LTE, LTE-Advanced, IEEE802.11ac, GNSS) |
|
SMW200A Highend Vector Signal generator |
Vector signal generator for the most demanding applications. As a result of its flexibility, performance and intuitive operation, it is a perfect tool for generating complex, digitally modulated signals of high quality. It provides internal RF bandwidth of 2 GHz and useful for applications like 5G,802.11ad, wideband radar applications |
FSW Signal and Spectrum Analyzer |
Offers low phase noise, 2 GHz internal wide analysis bandwidth and straightforward and intuitive operation, the analyzer makes measurements fast and easy |
|
FPH Handheld Spectrum Analyzer |
Rugged, handy, and designed for use in the field. It is low weight, long battery life, it is simple, has well-conceived operation concept and the large number of measurement functions make it an indispensable tool for anyone who needs an efficient measuring instrument for outdoor work |
|
FSVA Signal and Spectrum Analyzer |
Fast and versatile signal and spectrum analyzer for performance-oriented, cost-conscious users working in the development, production, installation, and servicing of RF systems |
|
FSWP Phase Noise Analyzer and VCO Tester |
Phase noise analyzer and VCO tester combines extremely low‑noise internal sources and cross‑correlation technology, delivering extremely high sensitivity for phase noise measurements |
|
CMA180 Radio Test Set |
A radio communications tester for radio systems that operate in the 100 kHz to 3 GHz range; Its technology is based fully on digital signal processing and advanced computing |
|
CTH100A/R&S CTH200A Portable Radio Test Set |
Testing of analog FM radio sets even under challenging environmental conditions |
|
NRQ6 Frequency Selective Power Sensor |
Combines the accuracy of a power meter with the dynamic range of a spectrum analyzer. It performs extremely precise and fast power measurements down to -130 dBm.100 MHz of measurement bandwidth makes it unique device for most of te applications. |
|
ZVA Vector Network Analyzer |
Meeting high end applications like pulse, noise figure & phase coherence measurements for active & passive devices |
|
ZNB Vector Network Analyzer |
Features high measurement speed, outstanding precision and exceptional ease of operation |
|
ZNL Vector Network Analyzer (Combo) |
Economy range benchtop combo analyzer for high accuracy bidirectional 2 port measurements & spectrum analysis with noise figure measurements |
|
ZNLE Vector Network Analyzer |
Economy range benchtop analyzer for high accuracy bidirectional 2 port measurements with Windows10 OS & touchscreen |
|
ZNBT Vector Network Analyzer |
Features upto 24 ports for multiport devices. Also a unique offering of parallel measurements in production scenarios |
|
ZVH Vector Network Analyzer (Combo) |
Handheld combo znalyzer for easy & fast cable and antenna test, 2 port device tests with an internal Bias Tee and power supply. Supports various modes like spectrum analzyer mode, power meter, and vector voltmeter. |
|
RTP Series |
Bandwidth upto 8 GHz; Compliance test solutions for USB, Ethernet, MIPI, Pcie, DDR; Extensive set of automatic measurements including eye diagrams; wideband and multi channel RF analysis; Supports modular probes for flexibility of connection to device under test(DUT) |
|
RTO 2000 Series |
Bandwidth upto 6 GHz; quickly find faullts with waveform update rate of 1,000,000 waveforms/sec; first zone trigger in time and frequency domain ; unique digital trigger for virtually zero trigger for triggering on any detail you can see; IQ and RF analysis |
|
RTE 1000 Series |
Bandwidth up to 2 GHz; Input sensitivity of up to 500 µV/div to capture signals of low amplitude; Up to 16 bit high definition mode standard; history mode always on for play back of previous acquisitions; Powerful FFT with spectrum analyzer controls suitable for EMI debugging |
|
RTA 4000 Series |
Bandwidth up to 1 GHz; 10 bit ADC; capturse more time at full bandwidth with deep memory standard 100 M samples on each channel and 200 M samples interleaved |
|
RTM 3000 Series |
Power analysis software for quick debug/characterization of power supplies; Integrated Digital Voltmeter and Frequency Counter; Serial Protocol Trigger & decode options for I2C/SPI,RS 232/USRT etc |
|
RTB 2000 Series |
Bandwidth up to 300 MHz; 10 bit ADC; USB MTP (Media transfer of protocol) to transfer files to PC via USB cable; Up to 16 digital channels with Mixed Signal oscilloscope Option; Web remote control for remote operation thru LAN |
|
|
RTC 1000 Series |
Bandwidth up to 300 MHz; 8 in1 integration (standard pattern generator, function generator, component tester, DVM, 6 digit counter, optional MSO and protocol analysis); Mask testing standard |
Scope Rider -RTH 1000 Series |
Five instruments in one – oscilloscope, logic analyser, protocol analyser, data Logger, digital multimeter, battery operated and handheld |
|
Rosenberger Electronic |
PIA – Passive Intermodulation Analyzers |
Facilitating quick and accurate measurement of the intermodulation characteristics of passive components like connectors, cable assemblies, antennas, and filters, Rosenberger PIM Analyzers precisely analyse the quality of mobile communication infrastructure as well |
Metrology Kits |
A comprehensive range of calibration, verification, and gauges/gauge kits for selected standard coaxial interfaces |
|
VNA Test Port Adapters, Test Cables & Microwave Cable Assemblies |
For microwave measurements and VNA calibrations, Rosenberger develops, manufactures, and provides test & measurement products which meet the highest demands of industrial test applications. High performance VNA test cables with outstanding phase and amplitude stability. |
|
Multiport Mini-Coax Connectors & Cable Assemblies |
A wide range of multiport Mini-Coax connectors and cable assemblies |
|
PCB Connectors |
Rosenberger provides a variety of standard and high-precision PCB connectors for test & measurement applications. The standard portfolio includes N, BNC, SMA, SMP, Mini-SMP, WSMP |
|
Savitri Telecom Services |
Optical Power Meter for all Application |
Measuring the signal strength at the end of OFC |
Optical Laser Source for all Application |
Measuring the signal strength at the end of OFC |
|
Visual Fault Locator for all Application |
Testing the other end of OFC with naked eyes for very small distances |
|
Back Reflection Meter for all Application |
For measuring the back signal strength in OFC cable |
|
Optical Variable Attenuator for all Application |
To attenuate the signal strength in OFC |
|
Optical Switch for all Application |
FOR distribution/Managing the running services |
|
Optical Talk Set, Clip on Coupler, Live Fiber Identifier |
For testing the availability of signal in OFC |
|
Optical Spectrum Analyzer |
Detail testing/Analysis of different available bandwidth |
|
SDH Analyzer |
Detail testing of transmission networks |
|
CWDM Channel Checker |
Testing of CWDM networks |
|
DWDM Channel Checker |
Testing of DWDM networks |
|
Optical Network Management (ONMS) System |
Managing Alarms with GPS and SMS/Mail pop-ups of OFC networks |
|
Smart OTU |
Managing Alarms with GPS and SMS/Mail pop-ups of OFC networks without servers individual user basis web base solution |
|
Trilithic Basic Signal Level Meter – 180 DSP |
A dependable tool for basic cable installation needs, the 180 DSP signal level meter features a compact rugged design, easy-to-use color user interface, and an unparalleled selection of digital and analog channel measurements, including DOCSIS 3.1 OFDM signal analysis |
|
Trilithic Basic Signal Level Meter – 360 DSP |
360 DSP signal level meters are specifically tailored for fast installation testing and troubleshooting. These meters come equipped with all needed analog and digital signal measurements to ensure the highest quality installation — and at a price point that makes it feasible for system operators to outfit their entire fleet |
|
|
Trilithic Basic Signal Level Meter – 1G DSP |
The 1G DSP can achieve throughput testing speeds of up to a gigabit/sec using a dedicated Ethernet test port or the internal cable modem. The meter can perform either roundtrip or one-way Key Parameter Index (KPI) measurements for full Ethernet service testing. With constant payload testing for Layer 2 through Layer 4 |
Cable and Pipe Line Locator |
Locating path and depth of underground pipes and cables |
|
Smart Class E-1Tester |
Detail testing of E1 signals |
|
Smart Class Ethernet |
Testing of ethernet traffic up to 1 GB |
|
XDSL Tester |
Testing parameters of copper cable |
|
Network Certifier |
Testing and certification of copper and fiber cables in networks as per different International standards |
|
ONT-600 Multiport Test Module (MTM) |
All-in-one solution tests layers 1 to 3 at 155 Mbps to 11.3 Gbps rates; Maximizes efficiency and minimizes test time with multiuser, multiport capability |
|
ONT-600 400G CFP8 Module |
A scalable test solution based on the latest draft standard for 400G Ethernet (IEEE 802.3 bs) and ready for OTUC4. A CFP8 slot hosts the first-generation 400G pluggables; Future FlexE and FlexO applications are addressed via 5 QSFP28 slots |
|
MTS-5800 Handheld Network Tester |
Fully-loaded TDM/PDH to dual 10 G Ethernet, SONET, SDH, Fibre Channel, and OTN support; Automated, enhanced RFC 2544; SAM complete testing per ITU-T Y.1564; Integrated burst testing approach per MEF 34; RFC 6349 TrueSpeed TCP throughput testing in single- and dual-port versions; Compatible with JDSU 4100-Series OTDR modules and Smart Link Mapper, fiber microscopes, and optical power meters |
|
MTS-6000A with CSAM |
Provides 100 Gbps network testing flexibility, tests 10 Mbps to 118 Gbps with a portable test instrument that can test every interface in the central office. CSAM is unique in its support of 100GE LR4, SR10, and SR4 in one instrument |
|
Cell Advisor |
One Visit, One Instrument, One Touch, unique fiber inspection, and front-haul RFoCPRI testing; RF and optical power in one instrument; 3GPP conformance auto testing; Best-in-class LTE, LTE-A, MIMO, and carrier aggregation demodulation; Unique coax and fiber single box solution; Unique cloud enable management; Enable single visit cell site turn up, installation and maintenance; Captures high speed wireless traffic for detailed analysis, uniquely rewinds time on your network for lightning-fast troubleshooting |
|
MTS-8000 with 40/100 G Transport Module |
Supports testing of all high-speed line rates, 40/100 GE, OTU3/4, and OC-768/STM-256 including field optimized optics self-test; Supports 40/100 GE with 10 concurrent Ethernet data streams for service testing integration into Y.1564 SAM complete |
|
RF power meters, RF analyzers, VSWR meters |
Measure signal strength; Radio frequency signal |
|
Multipurpose Base Station Testers/ Analyzers |
Test parameters of RF cables |
|
Fusion Splicing Machine (Single and Ribbon Fiber) |
For jointing the OFC |
|
Cable and Pipe Line Locator |
Locate path and depth of underground pipes and cables |
|
SEI Trading India |
Sumitomo Japan Z2C |
Core to Core; Fast splicing 6 sec; Heating time 15 sec; Electrode life 6,000 splice; Battery life 300 splice with heating; Universal holders, TSEC approved, software upgrade via Internet |
SPI Engineers Pvt. Ltd. |
EXFO MAX-715B-M1 |
Fully featured, entry-level, dedicated OTDR with tablet-inspired design perfect for frontline singlemode fiber installers.7-inch, outdoor-enhanced touchscreen – the biggest in the handheld industry, 12-hour autonomy, Dead zones: EDZ 1 m, ADZ 4 m, Dynamic range of 30/28/28 dB, Rugged design built for outside plant, iOLM-ready: intelligent and dynamic application that turns complex OTDR trace analysis into a one-touch task |
EXFO MAX-720C-SM1 |
This fully featured OTDR with tablet-inspired design for singlemode fiber testing in a dedicated and compact quad unit to allow everyday field testing, 7-inch, outdoor-enhanced touchscreen–the biggest in the handheld industry, 12-hour autonomy, Dynamic range of up to 36 dB in singlemode,iOLM-ready: intelligent and dynamic application that turns complex OTDR trace analysis into a one-touch task |
|
EXFO MAX-720C-Q1-QUAD |
This fully featured OTDR with tablet-inspired design combines singlemode and multimode fiber testing in a dedicated and compact quad unit to allow everyday field testing, 7-inch, outdoor-enhanced touchscreen–the biggest in the handheld industry, 12-hour autonomy, Dynamic range of up to 36 dB in singlemode and 29 dB in multimode, iOLM-ready: intelligent and dynamic application that turns complex OTDR trace analysis into a one-touch task |
|
|
EXFO MAX-730C-SM1 |
Fully featured, entry-level, dedicated OTDR with tablet-inspired design, suitable for metro and optimized to test through optical splitters, for seamless end-to-end FTTH characterization and troubleshooting.7-inch, outdoor-enhanced touchscreen–the biggest in the handheld industry, 12-hour autonomy |
EXFO FTB-735C |
High-resolution OTDR designed for metro networks testing and splitter characterization in PON FTTx applications.Dynamic range of up to 42 dB, Event dead zone of 0.6 m and attenuation dead zone of 2.5 m,Test through high-port-count splitters (up to 1×128) ,Singlemode port for in-service troubleshooting with in-line 1490/1550 nm power meter, EXFO Connect-compatible: automated asset management |
|
EXFO FTB-750C |
High dynamic range combined with high resolution for highly accurate fiber characterization.Dynamic range of up to 46 dB , Event dead zone of 0.6 m and attenuation dead zone of 2.5 m,Up to 256 000 sampling points,EXFO Connect-compatible: automated asset management; data goes through the cloud and into a dynamic database |
|
EXFO FTB-1v2/FTB-720C-SM1 |
This fully featured OTDR with tablet-inspired design for singlemode fiber testing in a dedicated and compact quad unit to allow everyday field testing, 8-inch, outdoor-enhanced touchscreen–the biggest in the handheld industry, 12-hour autonomy,Dynamic range of up to 36 dB in singlemode,iOLM-ready: intelligent and dynamic application that turns complex OTDR trace analysis into a one-touch task |
|
EXFO FTB-1v2/FTB-730C-SM1 |
Fully featured, entry-level, dedicated OTDR with tablet-inspired design, suitable for metro and optimized to test through optical splitters, for seamless end-to-end FTTH characterization and troubleshooting.8-inch, outdoor-enhanced touchscreen–the biggest in the handheld industry, 12-hour autonomy,Dead zones: EDZ 0.6 m, ADZ 2.5 m ,Dynamic range: 39/38/39 dB ,Rugged design built for outside plant, iOLM-ready: intelligent and dynamic application that turns complex OTDR trace analysis into a one-touch task |
|
EXFO FPM-300 (Optical Power Meter) |
Power meters are a toolbox essential for all technicians installing or maintaining any type of fiber networks. From general-purpose meters to meters optimized for certain types of networks—we have the gear you need. Highly accurate unit offering 10 calibrated wavelengths and reference values, No offset nulling required, reducing measurement time |
|
EXFO FPM-600 (Optical Power Meter) |
Offers a memory capacity of 1000 data items and converter software, for easy data management and USB transfer to a PC. Comes with more than 40 calibrated wavelengths, Adapts to all network types: LAN, CWDM, DWDM, etc. |
|
EXFO FLS-300 (Optical Laser Soure) |
The most versatile, complete light source available with up to three singlemode wavelengths on a single port, or four wavelengths (two multimode and two singlemode) on two ports.Can transmit with a wavelength-identification digital encrypted protocol so that any compatible unit can automatically use the proper calibration parameters |
|
EXFO FLS-600 (Optical Laser Soure) |
Part of EXFO’s 600 handheld series, the FLS-600 Light Source is designed for first-class versatility—it offers laser and LED models, as well as various wavelength options.Up to three singlemode wavelengths (1310 nm, 1550 nm, and 1490 nm or 1625 nm) on a single port, or four wavelengths (850/1300 nm and 1310/1550 nm) on two ports |
|
EXFO FIP-400 (Fiber Inspection Probe) |
Turn your Android™ or iOS device into a fully automated fiber inspection solution delivering fast and consistent test results. With no wires in your way or cumbersome battery pack, it provides unmatched end-user experience, combined with bring-it-anywhere portability.100% automated, one-step inspection process, Completely wireless, self-powered unit ,Screenless operation enabled by pass/fail LED indicator, On-board connector endface analysis (IEC, IPC or custom standards) |
|
VIAVI |
P5000i Fiber Microscope |
Automated Fiber Inspection & Analysis Probe provides PASS/FAIL capability to PC, laptops, mobile devices, and Viavi test solutions |
FiberChek Probe Microscope |
The “all-in-one” handheld solution for fiber inspection with built-in capabilities for image viewing, auto-focus, Pass/Fail analysis, storing/recalling results. It can be used on its own or connected (wi-fi, Bluetooth, USB) to other devices |
|
SmartOTDR |
Compact, easy, upgradable OTDR kit for installing and troubleshooting optical fibers across premises, FTTA, and FTTH networks |
|
SmartClass Fiber OLTS-85/85P |
Optical loss test sets let installers and technicians work fiber smart by integrating industry-leading fiber inspection with Tier 1 testing |
|
Yokogawa India |
AQ6370 Series Optical Spectrum Analyser |
OSA for characterization of optical components in telecom, VIS (visible), NIR (near-infrared), ex NIR (Extended near-infrared), MWIR (middle wavelegth infrared) regions |
AQ6360 Telecom Production Optical Spectrum Analyzer |
A cost-effective optical spectrum analyzer based on diffraction grating technology, ideal for optical device manufacturing |
|
Others |
OctoScope, Siricom, Sparnex Instruments, Sunrise Telecom, Tirumala Seven Hills (P) Ltd., Trend Communications, and VXL |
You must be logged in to post a comment Login