|
Vendor
|
Model/Services
|
Exclusive Features
|
|
Agilent Technologies India Pvt. Limited
|
Signal Generators
|
Widest selection of baseband, RF, and microwave signal generator (signal source) products from baseband to 67 GHz, with frequency extensions to 500 GHz with millimeter-wave source modules
|
|
Oscilloscopes
|
Ranges from 20 MHz to 33 GHz (RTS) and upto 90 GHz (sampling scopes). Support of multiple application software as FPGA, power, wireless, serial bus
|
|
Agilent Technologies India Pvt. Limited
|
Wireless device test sets and solutions
|
One box test sets which covers all the major technology formats - GSM/GPRS/EGPRS/E-EDGE, W-CDMA/HSPA/HSPA+/DC-HSDPA, cdma2000/1xEV-DO/eHRPD, TD-SCDMA/TD-HSDPA/TD-HSUPA, IS-95, TIA/EIA-136, AMPS, Bluetooth, Bluetooth enhanced data rate (EDR), ZigBee, wireless LAN (WLAN), 802.11a/b/g, 802.11n MIMO, WiMAX and LTE (FDD and TDD)
|
|
Spectrum Analyzers(signal analyzers)
|
Extensive selection of spectrum analyzer and signal analyzer products from DC to 50 GHz and extendable to 325 GHz with external mixers, for spectrum analysis measurements; accurately measure frequency, amplitude and modulation including distortion, spurious, phase noise, and 2G to 4G wireless communication signals
|
|
Network Analyzers
|
From 5 Hz to 1.05 THz, choose from a growing selection of RF and Microwave network analyzers to measure S-parameters, insertion loss, gain, return loss, balanced parameters, differential measurements, compression, distortion, and noise figure
|
|
AIMIL Ltd.
|
Boonton Electronics make Power Meter model 4542 with peak and CW power sensors
|
Measures peak and CW power upto 110 GHz (sensor dependent); video bandwidth of 70 MHz; dynamic range from –70 to +44dBm
|
|
Spectracom make Frequency Counter CNT 90XL
|
Portable and battery operated upto 60GHz
|
|
Tabor Electronics make Arbitrary Waveform Generator model WX2182
|
Generates arbitrary waveform of 1GHz at 2.1GS/s with multi channel option
|
|
Aishwarya Telecom
|
Site Analyzer, Make:GSI-Korea, Model: A434
|
Works up to 4 GHz touchscreen facility, user friendly, and TEC approved
|
|
BTS Tester, Make: Sage-US; Drive Tester, Make: Dingli-China; Walk tour for IBS, Make: Dingli-China
|
|
|
Protocol Analyzer
|
TEC approved
|
|
Spectrum Analyzer, Make: GSI-Korea
|
Works up to 2.9 GHz, and a very handy product
|
|
RF Power Meter, Make: ATL-India
|
|
|
OTDR, Make: ATL-India
|
TEC-approved touchscreen facility with user-friendly operation
|
|
Laser Source, Make : ATL-India; Variable Attenuator, Make: ATL-India; Power Meter, Make: ATL-India; 2 Mbps Tester, Make: ATL-India; Cable Fault Locator, Make: ATL-India; Cable Route Locator, Make: ATL-India; Electronic Marker Locator, Make: Rycom, Electronic Marker, Make: ATL-India
|
TEC approved
|
|
ADSL 2+ Tester, Make: ATL-India
|
–
|
|
SDH Analysers 1/4/16, Make: Dadi Telecom-China; 2 Mbps Tester, Make: Dadi Telecom-China; Ethernet Traffic Analyzer, Make: Dadi Telecom-China; STM 64 Analyzer, Make: Bluelight-USA
|
–
|
|
Splicing Machine, Make: Sumitomo-Japan Model: Z1C
|
TEC approved
|
|
Anritsu
|
Handheld solutions (site master, spectrum master, vna master, cell master, BTS master, access master)
|
Wide and reliable handheld measurement solutions in market to meet all field testing requirements
|
|
Mobile UE testing solutions (mobile protocol testing, application testing and RF testing)
|
Mobile testing solutions covering the entire life cycle of mobile handset (R&D, conformance, manufacturing and maintenance); solutions for all technologies like GSM/WCDMA/TDSCDMA/CDMA2000/LTE (FDD&TDD)
|
|
General purpose solutions (spectrum analyzers, signal generators, signal analyzers, synthesizers)
|
Range of precise solutions covering wide frequency range and technologies
|
|
Emerson Network Power
|
Monitoring Solutions
|
Solutions for complete monitoring of telecom BTS sites
|
|
Out Door Enclosures
|
Enclosures are designed and manufactured exclusively for housing DC power system, telecom active equipments, and battery banks
|
|
Cooling & thermal solution for Out Door Enclosure
|
Various capacity 48 V DC operated air conditioners till 0.5 tonnage capacities as per telecom requirement; also available 48 V DC operated air-to-air heat exchanger
|
|
Empirix
|
Multi-service Probes
|
2G/3G/LTE Probe, protocol analyzers
|
|
Hammer IP
|
IP call generator
|
|
OneSight monitoring tool
|
End-to-end call center monitoring solution
|
|
EXFO India
|
Field network test solution – optical fiber category:
|
|
FTB-1, FTB-730, and FTB-730-iOLM
|
New generation of intelligent OTDR designed for FTTx/MDU test challenges within PON networks, access point-to-point (P2P) network testing, and
metro/core network testing
|
|
FTB-200 and FTB-7300E
|
Compact and modular handheld OTDR designed for FTTx/MDU test challenges within PON networks, access network testing, platform support other modular test modules such as CD/PMD, OLTS, SDH, Ethernet, OTN, fiber channel and in-band OSA
|
|
FTB-200 and FTB-7200D
|
LAN/WAN Access OTDR is designed for access network testing, and LAN/WAN characterization
|
|
FTB-1, FTB-720, and FTB-720-iOLM
|
Intelligent OTDR designed for access network testing (P2P), LAN/WAN characterization, private networks,
data centers, and cell backhaul deployments
|
|
FTB-200 and FTB-7400E
|
Metro/CWDM OTDR is designed for Metro and CWDM network testing
|
|
FTB-200 and FTB-7500E
|
Metro/Long-Haul OTDR is designed for Metro and long-haul network testing
|
|
FTB-200 and FTB-7600E
|
Ultra-Long-Haul OTDR is designed for ultra-Long haul link characterization, construction/ maintenance and troubleshooting tool
|
|
FastReporter2
|
Data post processing software for IOLM, OTDR, ORL, loss, PMD and CD; intuitive graphical user interface (GUI); live templating for OTDR testing; powerful batch processing; bidirectional batch analysis; automatic tool for duplicated measurement verification
|
|
AXS-110
|
All Fiber OTDR designed for FTTx/MDU PON network testing, LAN/WAN testing, and private network testing
|
|
AXS-100
|
Handheld access OTDR designed for FTTx last-mile in-service troubleshooting, point-to-point link testing, and CATV network testing
|
|
FTB-LTC/PSB/SPSB
|
Launch test cable/pulse suppressor box; installation/troubleshooting/OTDR testing essential: covers the OTDRís dead zone, enabling loss measurement on the first and last connections of a fiber under test; increase the life of the OTDR connector by reducing the number of matings on the OTDR connector; singlemode and multimode fiber models; wide selection of connectors for quick connection to most OTDR and patch panel ports; modular FTB-LTC, portable SPSB and stand-alone PSB: available in lengths of 150, 300, 500, 1000 and 2200 m
|
|
FTB-2200 Broadband Source
|
Battery-operated, high-power polarized light source; 40G-/100G-ready: includes polarization scrambler for increased accuracy; for use with EXFOís FTB-5500B PMD Analyzer, providing the most accurate polarization mode dispersion analysis in the field
|
|
FTB-5700 Single-Ended Dispersion Analyzer
|
Applications include accurate, complete 10 Gbit/s, 40 Gbit/s and 100 Gbit/s qualification, metro, core and long-haul network testing, underground and aerial cable testing
|
|
FTB-5600 Distributed PMD Analyzer
|
Applications include PMD assessment for upgrading networks to 10, 40 and 100 Gbit/s transmission
|
|
FLS-5800A CD/PMD Analyzer Source
|
Applications include modulated for chromatic dispersion measurement, polarized for PMD measurement, and broadband spectral range
|
|
FTB-5500B PMD Analyzer
|
Applications include 10 and 40 Gbit/s network qualification, and PMD testing on buried and aerial fiber links, amplified or not
|
|
FTB-5800 Chromatic Dispersion Analyzer
|
Applications include accurate CD compensation for 10 Gbit/s networks, and 40 Gbit/s network qualification and CD compensation
|
|
FOT-5200 CWDM Analyzer
|
Applications include installation, maintenance, repair of any CWDM network, and cellular backhaul activation for telco and CATV operators
|
|
PPM-350C
|
BPON, EPON and GPON configurations; service activation and troubleshooting; data storage and reporting capabilities; concurrent measurement of all PON signals, anywhere on the network; innovative workflow management, for boosted test routine efficiency; enhanced rugged and weatherproof design; protected data format, for guaranteed test result authenticity
|
|
FiberBasix 50
|
Entry Level Optical Handheld Light Source and Power Meter; link-loss characterization (ELS-50 Light Source); Power measurement (EPM-50 Power Meter); easy-to-use interface for error-free testing; interchangeable connectors, for first-class flexibility; cost-effective, rugged and highly reliable; ideal for testing and troubleshooting optical premises networks; five test kits to choose from: LAN, outside plant, contractor, FTTH and CATV
|
|
FiberBasix 500
|
Link-loss characterization (ELS-500 Light Source); LAN/WAN certification (ELS-500 Light Source); link-loss characterization and LAN/WAN certification (EPM-500 Power Meter); error-free testing features: automatic wavelength recognition, and no offset nulling required; data transfer to a PC via USB connection; one-touch storage of results for all wavelengths at once (on the EPM-500); complete reporting software
|
|
FOT-930 MaxTester
|
Bidirectional link-loss and ORL characterization; high-fiber-count network construction; FTTx construction; combines a powerful light source, a power meter, a visual fault locator, a full-duplex digital talk set and a video fiber inspection probe; high-resolution color display and nine hours autonomy; ideal for testing FTTx-based cable TV, POTS and high-speed data services; cost of ownership is one of the lowest in the industry, thanks to three-year warranty and recommended calibration interval, error-free testing and minimized training time
|
|
FPM-300 Power Meter
|
Automatically uses the proper calibration parameters when combined with the FLS-300 or FOT-300 source units; highly accurate unit offering 10 calibrated wavelengths and reference values; no offset nulling required, reducing measurement time; three-year warranty and recommended calibration interval, for dramatically reduced cost of ownership; autonomy of over 300 hours
|
|
FLS-300 Light Source
|
Auto wavelength recognition can transmit with a wavelength-identification digital encrypted protocol so that any compatible unit can automatically use the proper calibration parameters; autonomy of 120 hours; one of the highest output power in the industry; three-year warranty and recommended calibration interval, for dramatically reduced cost of ownership
|
|
FVA-600 Variable Attenuator
|
Applications include handling high power up to 24 dBm, suiting any application, including CATV and telco, BER testing-ready: high optical resolution of 0.01 dB, FTTx-readiness standard 1310, 1490, 1550 and 1625 nm wavelengths
|
|
LFD-300B/TG-300B FiberFinder
|
Live fiber identifier and tone generator; identify mislabeled, transposed fiber
|
|
FLS-240 Pocket Pal
|
Visual Fault Locator (VFL); break and macrobend location; fiber identification; detects faults over distances of up to 5 km; bright red laser at 635 nm; pulsed and CW operation for up to 50 hours (typical); universal connector for 2.5 or 1.25 mm ferrule
|
|
ConnectorMax
|
Connector inspection and certification; network troubleshooting; IEC/IPC-compliant network acceptance testing; full test reports for future referencing
|
|
Field Network Test Solution – Copper Access / MultiPlay Category:
|
|
MaxTester 630
|
ADSL2+/VDSL2 and IP Triple Play Test Set ensures that customers have the required bandwidth (downstream and upstream rates) for delivering triple-play services over single-pair or bonded ADSL2+ and VDSL2, validates that the IPTV and data services can operate on the circuit with the required QoS, verifies that the customerís modem/router, equipment and inside wiring are operating correctly, and proves data flow between the network and the end equipment
|
|
AXS-200/635
|
Copper, VDSL2, ADSL2+ and IP Triple Play Test Set has Copper qualification to identify and locate physical layer faults and qualify the copper local loop for suitability of handling triple-play services over DSL, service verification for being sync with the DSLAM to determine upstream/downstream DSL data rates or confirm Ethernet link status (10/100), and Triple-play analysis to analyze IPTV and VoIP quality of service (QoS) and conduct IP connectivity tests over ADSL2+, VDSL2, or Ethernet 10/100 links
|
|
AXS-200/650
|
IP Triple Play Test Set is optimized for FTTH IP triple-play service commissioning and verification, internet connectivity assessment using ping, traceroute and HTTP/FTP speed testing, simple, affordable residential IP triple-play testing with pass/fail indication, IPTV and VoIP service assurance using a comprehensive range of QoS metrics, feature-rich, but cost-effective: Ethernet 10/100 termination and Ethernet 10/100 pass through with triple-play QoS measurements
|
|
AXS-200/610
|
Copper test set with single-ended wideband frequency response and balance tests identify high-frequency, service-affecting faults, prequalification of subscriber loops for carrying ADSL2+ or VDSL2, spectrum qualification of circuits in any VDSL2 band plan (12, 17 and 30 MHz), loop and fault analysis using proven TDR and FDR techniques, visual reports, graphs and histograms, displaying signal and noise issues, 30 MHz spectrum analysis for VDSL2 and video prequalification and troubleshooting, single-ended tests minimizing repair time and costs, automated clear, pass/fail results speeding up and simplifying test cycles
|
|
CableShark P3
|
VF/DSL Cable Qualifier for single-ended loop testing to up to 6 MHz, single-ended ADSL2+, ADSL2, ADSL and SHDSL data rate prediction, fully automatic graphical and numeric time-domain reflectometer (TDR), VF, ADSL, ADSL2+ and SHDSL automatic pass/fail testing, loop current measurement, and ADSL auto-testing with pass/fail indication and user modifiable thresholds
|
|
DSL Multiload Attenuator
|
CO/exchange dispatch and referral reduction; ADSL port recovery; new DSLAM port verification; DSL performance isolation of cable sections; tests ADSL2+ port performance with technology-specific attenuation (simulated length); simulates attenuation of six different lengths and bypass upon ADSL/2/2+ signals; safe for use at the central office (CO) or at the exchange: no electronics to fail or batteries to replace, no electronic emissions; light, compact handheld device that is easy to carry anywhere
|
|
Field Network Test Solution – Transport and Datacom Category:
|
|
FTB-860 NetBlazer Series Carrier Ethernet Tester
|
Carrier Ethernet, Mobile Backhaul, Metro/Access Ethernet Testers specifically designed for deployment, validation and troubleshooting of access and metro Ethernet services; comprehensive testing across 10 Mbit/s to 10 Gbit/s network environments
|
|
FTB-880 NetBlazer Series MultiService Tester
|
Powerful and Fast MultiService Test Set specifically designed for deployment, validation and troubleshooting of access and metro Ethernet services, comprehensive testing across 10 Mbit/s to 10 Gbit/s network environments, DSn/PDH, and SONET/SDH
|
|
FTB-810 NetBlazer Series Transport Tester
|
Transport Tester designed for applications including DSn/PDH and SONET/SDH
|
|
SyncWatch-110 Synchronization Testing Unit
|
Applications include R&D engineering and equipment benchmark, network planning, synchronization activation, synchronization monitoring, and synchronization troubleshooting
|
|
FTB-8120NGE/8130NGE Power Blazer Next-Generation Multiservice Test Modules
|
Applications include MSTP, MSPP and ROADM field installation, commissioning and service turn-up, DSn/PDH and SONET/SDH up to OC-192/STM-64, OTN (ITU-T G.709) with FEC testing and ODU multiplexing up to 10.7 Gbit/s, 10/100/1000M, GigE and 10 GigE (LAN/WAN) BERT and RFC 2544 testing, and 1x, 2x, 4x and 10x Fibre Channel testing
|
|
FTB-5240S/BP Optical Spectrum Analyzers and In-Band Optical Spectrum Analyzers
|
Applications include characterization of all channel spacings, from 25 GHz DWDM to CWDM, ROADM and 40 Gbit/s testing, and intelligent in-band OSNR ROADM testing
|
|
FTB-8510B Packet Blazer Ethernet Test Module
|
Applications include performance validation of carrier-grade Ethernet services, IPTV testing and analysis (option available only with the FTB-500 platform)
|
|
AXS-200/805/855 Multilayer Access Test Set
|
Applications include performance assessment of carrier Ethernet services, installation, activation and maintenance of metro Ethernet networks, and deployment of active Ethernet (point-to-point) access services
|
|
ETS-1000 Ethernet Analyzer
|
Applications include installation and turn-up of carrier Ethernet services
|
|
FTB-8510G Packet Blazer 10 Gigabit Ethernet Test Module
|
Applications include performance validation of carrier-grade 10 gigabit Ethernet services, BERT, RFC 2544 and advanced Layer 3 and 4 traffic generation and analysis
|
|
ETS-1000L Ethernet Loopback Device
|
Applications include installation and turn-up of carrier Ethernet services
|
|
FTB-860GL 10 Mbit/s to 10 Gbit/s Loopback Tester
|
One of the most cost-effective solution for GigE and 10 GigE intelligent loopback testing; supports bidirectional EtherSAM and RFC 2544 testing and offers five loopback modes; intelligent auto discovery; IPv6 testing; smart loopback
|
|
FTB-8525/8535 Packet Blazer Fibre Channel and Ethernet Test Module
|
Applications include fibre channel service characterization and ethernet performance validation
|
|
FTB-8140 Transport Blazer 40/43 Gigabit SONET/SDH/OTN Test Module
|
Applications include SONET/SDH turn-up and troubleshooting, and optical transport network (OTN) testing
|
|
FTB-85100G Packet Blazer 100G/40G Ethernet and OTN Test Module
|
Applications include purpose-built for applications where thorough testing, portability, true ruggedness and ease of use are required, fast performance/functionality validation of CFP, CXP and QSFP transceivers, in the lab or in the field, and 100 Gbit/s switch and router engine stress tests against demanding corner cases with full-line-rate Ethernet and IP packet generation at over 148 million packets per second
|
|
RTU-310/310G IP Services Test Head
|
Applications include performance validation of carrier-grade 10 gigabit Ethernet services, BERT, RFC 2544 and advanced Layer 3 and 4 traffic generation and analysis
|
|
Quality of Service Assessment – Remote Network Management Category:
|
|
NQMSfiber Network Quality Monitoring System
|
One-click automatic provisioning capabilities; web-based element management system (EMS) and remote test unit (RTU); 24/7 detection, location and tracking of fiber degradations; unique RFTS test method for reference data management; comprehensive monitoring and reporting capabilities; fault-on-map feature with GIS-based network documentation (optional)
|
|
Fiber Guardian Standalone Remote OTDR Unit
|
Applications include remote fiber characterization, testing, 24/7 monitoring and alerting functions, and measurement of fiber, splice and connector aging
|
|
R&D and Manufacturing Test Solution – Optical Communication Analyzers
|
|
PSO-100 Series Optical Sampling Oscilloscopes
|
Applications include high-speed transceiver compliance testing, line card and system design and characterization, and new modulation scheme research
|
|
PSO-200 Series Optical Modulation Analyzer
|
Applications include testing of phase-modulated transmitters like 100G DP-QPSK in manufacturing, design and optimization of system band on phase and amplitude modulation schemes at rates up to 1 Tbit/s and beyond
|
|
Fastech Telecommunications (I) Pvt Ltd.
|
Transmission Testers
|
SDH/PDH Analyzers for STM-1/4/16/64; core 10GE and IP/MPLS analyzers; test sets for 40G and 100G; jitter and wander testing
|
|
Ethernet Testers
|
Handheld Ethernet testers, 1GE/10GE portable analyzers for the field and lab, and synchronization testers for SyncE and IEEE 1588v2
|
|
EMF Measuring Tools
|
Handheld selective frequency EMF analyzers; broadband EMF meters; personal monitors for E & H fields; simulation tools for EMF plots in the lab
|
|
Cellular testers
|
Wireless data service monitoring systems; mobile services simulation test platforms; network consultant and protocol analyzers; LTE protocol analyzer; mobile backhaul Ethernet/PDH synch testing; CPRIS 3.072 Gbps testing
|
|
Service assurance systems
|
Wireless data service monitoring systems; VoIP and NGN/IMS service monitoring systems; regeneration and aggregation taps
|
|
Fluke Networks
|
DTX CableAnalyzer Series
|
DTX significantly reduces total certification costs up to 33 percent a year; independently verified by ETL to meet ISO Level IV and TIA level IIIe accuracy requirements; analyze test results and create professional test reports using LinkWare reporting software; perform basic fiber certification five times faster with DTX fiber modules
|
|
OptiFiber Pro OTDR
|
Creates a new standard for usability with a smartphone interface that supports gesture-based commands, and technology enhancements that simplify testing in datacenter environments
|
|
Ideal Industries India Pvt. Ltd.
|
NaviTEK
|
Cost-effective network and cabling system test and troubleshooting tool with advanced IP features for quick problem identification and resolution
|
|
LanXPLORER
|
Most comprehensive network tester (both In-line active and passive networks) with extensive test capability for copper and fiber networks; perfect test tool for IT Installers and system administrators in any enterprise, campus or industrial environment
|
|
SignalTEK
|
Innovative tool to test and document performance of voice, data video and VoIP application by simulating the Ethernet traffic and measuring the link performance against critical parameters for both copper and fiber Ethernet networks
|
|
INVAS Technologies Pvt. Ltd.
|
Next-Generation SDH, OTN and Multiservice Test Solution (Principal: EXFO, Canada)
|
In the lab and network equipment manufacturing (NEM) environment, R&D engineers require scalable test solutions with port density, multi-user accessibility and automation capability. This solution the right offering of multiservice test modules covering a wide range of technologies, including SONET/SDH, Ethernet, OTN, and Fibre Channel
|
|
Fiber Guardian (Principal: EXFO, Canada)
|
Entirely stand-alone OTDR remote test unit, designed to enable you to start monitoring critical fibers without the larger investment required for a client-server RFTS application.
|
|
All New Fusion Splicer Type-81C (Principal: Sumitomo, Japan)
|
Compact, light weight and feature-rich model with high reliability under field conditions. Being offered in India at competitive prices.
|
|
IXIA
|
IxLoad LTE Access
|
Scalable solution for testing converged multiplay services in 3G and LTE wireless networks
|
|
IxCatapult
|
Deep functional and protocol testing of LTE, 3G, SS7, and IMS networks
|
|
JDSU
|
MTS-5800
|
One of the industryís smallest 10G handheld instrument supports testing throughout the entire service life cycle including installation, troubleshooting, and maintenance
|
|
MTS-6000A
|
Offers an extensive portfolio of test functionality with over 40 different modules supporting a wide range of applications; capable of performing SDH, Ethernet, FiberChannel, OTN, OTDR, OSA, CD, PMD; capability to test the Layer 4 link with TCP TrueSpeed automated script application
|
|
MTS-8000
|
Multi-technology modular platform, capable of testing SDH, Ethernet, FiberChannel, OTN, OSA, OTDR, CD, PMD; also has 40G/100G module available for testing these high-speed transport links
|
|
ONT series
|
Multi-application support including SONET/SDH, NewGen, Ethernet, Fiber Channel, OTN, Jitter, DSn/PDH; 40G/43G SDH/SONET/OTN and unframed BERT testing with jitter/wander capability
|
|
PDR
|
Optical Power Meter
|
Supports installation, maintenance, and testing of single-mode and multimode networks and cables
|
|
OTDR
|
Offers a wide range of high-performance OTDRs for todayís network applications including FTTx, 40G, and ROADM
|
|
Optical Laser Source
|
Offering flexibility to test, install, and maintain single-mode and multimode fiber-optic networks for every application from PON to Gigabit Ethernet
|
|
Rohde & Schwarz India Pvt. Ltd.
|
Spectrum Analyzer
|
4/8GHz
|
|
Power Meters
|
Up to 40 GHz
|
|
Scanners (TSMW)
|
6GHz
|
|
EMF Test
|
9kHz-6GHz
|
|
Coverage Software Solution
|
Unique solution for GSM, WCDMA, CDMA2000, WiMAX, LTE, and TETRA.
|
|
Rosenberger Electronic Co. (India) Pvt. Ltd.
|
High precision adaptors
|
A comprehensive product range
|
|
Calibration kit, Cable assembles
|
|
Attenuators, Terminations
|
|
Seven Hills Opticommunication
|
RF & Microwave Test Equipment
|
Principals: JDSU, EXFO, IXIA, Rohde & Schwarz, Bird Technologies Group, Shineway Technologies, Techwin Industry
|
|
Spirent Communications
|
Spirent TestCenter
|
One of the first multi-core processing architecture delivering the affordable, high-density test platform with stateful, line-rate multiplay scalability; capable of emulating real network topologies, allowing collapsing of complex physical topologies traditionally used to recreate real-world IP services; patented accuracy enabling highest multi-user scalability
|
|
Avalanche
|
Provides complete multi 10 Gbps security, attack and performance testing for network infrastructures, web application infrastructures, virtual/cloud infrastructures, and triple play services ensuring quality of service (QoS) and quality of experience (QoE)
|
|
LandSlide
|
Provides a comprehensive end-to-end platform that emulates millions of mobile data subscribers, simultaneously accessing the wireless network using various access models
|
|
Spirent iTest
|
Enables testers, developers, and automation teams to automate testing practices at several key levels: process, asset sharing, and communication
|
|
VR5
|
Brings unprecedented ease of use to testing MIMO/beamforming devices and base-stations
|
|
Other Players
|
Aeroflex, Aplab, Trend Communications, Aeroflex, Kochar Infotech, MECO Instrument, MEL Systems, NI Systems India Ltd., Premier Measurement Solutions Pvt. Ltd., Scientific Mes Technik, Sunrise Telecom, Sumitomo Electric, Trend Communications, TTL Technologies, UL India, Tektronix, Tirumala Seven Hills (P) Ltd., Toshniwal, V-Tech Communications, and VXL
|
