The electronic test and measurement (T&M) industry has been taken by storm lately with trends such as Internet of Things (IoT), millimeter-wave (mm-wave) frequencies, and 5G suggesting significant changes in requirements for test equipment, thus opening up opportunities for vendors.
Growth Prospects and Key Trends
Used across the lifecycle of a product, from research and development (R&D) to manufacturing to deployment, T&M instruments are critical to ensure product performance and shorten time-to-market (TTM), although customer requirements differ widely across these segments.
Generating about USD 2 billion globally in 2015, the R&D segment of the new general purpose test market is expected to witness single-digit growth rates over the next 5 years that will steadily accelerate and result in the market reaching USD 2.4 billion by 2021. The R&D T&M market will benefit from high-speed digital trends and a revitalized bit-error-ratio tester (BERT) market driven by the data center buildout with the emergence of 400 gigabit Ethernet (GbE) technologies and complex modulation signals such as pulse amplitude modulation (PAM)-4. Although the R&D T&M market relies heavily on the oscilloscopes market, the contribution of radio frequency/microwave (RF/MW) test equipment to the revenues will be much greater 5 years from now, especially that of signal analyzers. RF/MW T&M equipment, such as signal generators, network analyzers, and power meters, will also benefit from the move to higher frequencies and wider bandwidths not only due to the advent of disruptive technologies such as 5G but also a general move toward higher frequencies in aerospace and defense (A&D), automotive radars, and other industries. Today, over half of the market revenue for T&M equipment used in the laboratory comes from instruments with a frequency range of up to 6 GHz. By 2021, the share of revenue coming from instruments with a frequency range of over 26.5 GHz will be about 5 percent higher than it was in 2015.
In manufacturing applications, T&M equipment vendors have faced a tougher environment with stiff competition due to lower technical requirements in comparison to the R&D segment. While the market experienced a slow growth over the past few years generating about USD 1.6 billion in 2015, it is expected to follow a recovering trend and reach USD 1.8 billion by 2020. However, one of the greatest challenges ahead is to make the testing of mm-wave frequencies cost effective in the mass production environment. This challenge will grow in importance over time and become more significant with the deployment of technologies such as 802.11ad (WiGig) and 5G. In the short term, IoT generates plenty of challenges for manufacturers. Many are struggling to add connectivity to devices that have never been connected before. They lack expertise in RF and related fields. There is also significant price pressure from the consumer that impacts the entire value chain. Manufacturers are thus looking for cost-effective solutions from T&M OEMs who must provide such solutions while addressing more complex technologies that drive costs up. With the wide variety of IoT, manufacturers also require solutions with extensive capabilities and flexibility. Plagued by a host of challenges, the manufacturing environment presents significant opportunities to T&M for innovation. Besides providing faster and less expensive instruments of higher performance, one of the key opportunities for T&M vendors in the manufacturing environment is to provide expertise. There is a strong desire across industries for using the huge amount of data being generated by manufacturing operations to improve production yield among other metrics.
Increased Penetration of Modular Instrumentation
The advent of more complex technologies and efforts to reduce the cost of test and TTM are expected to continue to drive the growth of automation across industries, expanding the addressable market for modular instrumentation. In addition, measurement speed, flexibility, and other aspects of modular instrumentation contribute to driving demand for such instrumentation over traditional equipment, fueling the growth of this market. Among the different standards that make up modular instruments, PXI certainly stands out. This market is expected to witness double-digit growth over the next 5 to 7 years growing from USD 702 million in 2015 to USD 2.2 billion in 2022. While the PXI market will witness significant growth over the next few years, it will also transform itself making foray in R&D. Primarily a replacement play in the manufacturing environment up until now, PXI is expected to evolve toward a more balanced footprint across R&D and manufacturing spaces over time. It is seeing increasing adoption as an R&D platform due to greater complexity and flexibility requirements in such applications.
Differentiation through Software Gains Importance
New business models are also set to revolutionize the T&M industry over the next decade. While the higher complexity of technologies across industries has called for a higher demand for tests, the new T&M equipment market has not witnessed proportional growth. There are several reasons for this, including software upgrades, which have become the norm in the industry and extend the useful life of instruments. With rapid changes in technology, customers have become increasingly concerned about the longevity of their equipment, driving suppliers to offer software upgrades. Software upgrades are now common in the industry to add functionality to hardware over time and keep up with changing test needs. Differentiation through software will become increasingly important. From a business model perspective, this is expected to evolve to software-as-a-service (SaaS) and cloud licensing.
Growing Demand for Rental and Leasing Services
Another reason for the new T&M equipment market not experiencing the growth expected with the proliferation of smart products and ubiquitous connectivity is the growing awareness about expenses and use related to T&M equipment. With the economic downturns of 2002 and 2008, T&M made its way to the radars of financial directors and controllers, driving scrutiny over this large capital expense and related costs. Companies have been more attentive to usage of those assets and have devised strategies to better manage them. As a result, there has been growing awareness about different acquisition means, including rental and leasing services. While currently low, the penetration of such services in the industry has steadily increased; it is expected to continue in the future and could reach 30 percent eventually. In 2015, this market's revenue ranged between USD 520 million and USD 540 million for North America and Europe. While a large proportion of this market lies with field applications, both R&D and manufacturing applications represent opportunities for rental and leasing services. In research, one-off projects hold potential for rental services, and the price tags and fast evolution of technology present opportunities for leasing services in development applications. In manufacturing, companies requiring high flexibility, dealing with seasonality, and having a high focus on cost provide opportunities for such services.
Steady Growth of Calibration and Repair Services
Other services offer T&M OEMs significant revenue opportunities, notably in calibration and repair. This market has been growing steadily over the past few years feeding off the large installed base of T&M equipment worldwide. Despite lackluster growth in the new electronic test equipment market, T&M OEMs continue to sell millions of dollars worth of equipment on an annual basis and customers looking to use their equipment longer increase their demand for calibration and repair services. Moreover, requirements for higher product quality and safety continue to increase. High-tech products are also growing in importance; their higher complexity calls for the use of more complex and accurate instrumentation, requiring more complex calibration routines and procedures as well as tighter calibration intervals to limit the number and importance of out-of-tolerance (OOT) issues. Totaling USD 1.31 billion in 2015, the calibration and repair services market in North America is expected to grow to USD 1.85 billion by 2022. In Europe, this market generated USD 1.51 billion in 2015 and will likely reach USD 2.13 billion by 2022.
Big Data Analytics Solutions and Services
Beyond traditional services, such as calibration and repair or rental and leasing services, big data analytics solutions and services can greatly benefit companies across industries to improve their operations across departments as well as their competitiveness by enabling them to improve product/service quality and shortening their TTM. Test data is a goldmine for improvements that have been largely untapped. It can help streamline the development and manufacturing process and reduce wastage, thereby improving productivity. Many organizations have realized that they could benefit tremendously from leveraging test data and some have developed in-house systems to harness it. These are typically in the form of databases where test data is stored and programs are run to generate the information they need. However, they lack awareness about what is possible. With the commoditization of hardware, expertise in big data and predictive analytical models will become a competitive advantage for vendors.
Test Is More than New Equipment
While 2016 is expected to be soft for the electronics test equipment market, this is merely due to the high concentration of the market on the new test equipment space. A plethora of opportunities related to test exist that market participants can tap into. Market participants must broaden their view of the test market and capture adjacent growth opportunities while addressing areas of needs in their core markets.
Courtesy: Visionary Insights: Frost & Sullivan